News about the DAZ Studio and Poser software

Category Archives: Freebies

Renderstudio for Poser 11

Posted on by Posted in Freebies, Poser Leave a comment

DAZ’s time-limited freebies have updated with a new set.

Worth having, “To the Beat Poses” dance-exercise poses set for Genesis 2, with Poser CF files (for DSON import to Poser).

Also two large IBL light-probe environment sets for Poser, including Renderstudio – Skylight And Atmosphere which has 8,000px sky panoramas and atmosphere presets. “Extremely fast rendering”, according to the original RuntimeDNA blurb…

The included Atmosphere module will not put any strain on your rendering times as it is generated by Poser’s very own ‘Depth Cue’ cue system. I have found that using these atmospheres adds no extra rendering time at all!!!

Tested and working in Poser 11, and as it uses no scripts I assume it would also work in P12 and P13.

It’s true, it’s pleasingly fast. But it’s also only able to use the old Firefly engine, since the depth-fogging atmosphere and sun-colour don’t appear in the newer SuperFly (i.e. Blender Cycles).

Simpler and quicker than Poser to Vue. Here are comparisons…

Simple English terraced houses with Renderstudio set up in Poser. Very quick Firefly render, less than a minute at 1800px.

Simple English terraced houses with saved Poser scene to Vue import. Slow even at 1800px (8 minutes), textures now look a lot better but more grungy.

Note that Vue’s default Final preset was possibly using high bumps and displacement, which with a different render setting I might have been able to add to the Poser render to make it more grungy and 3D textured.

Anyway, it’s not SuperFly or Vue… but yes, it’s fast as well as easy in Poser. You get fast Poser atmosphere presets with an easy sunlight position dial and sun colour presets. Which may be just what some Firefly users need for a big outdoor backdrop, for a finished product in which the foreground is going to be the focus of attention.

By comparison, the same prop/scene is so horribly unwieldy in the DAZ Studio viewport as to be essentially unusable. I didn’t even get as far as rendering, before I gave up on it.

Fan-art G8 figures

Posted on by Posted in DAZ Studio, Freebies Leave a comment

Testing Shinteo’s free fan-art G8 figures. There’s a lot of them, but he has a handy page which groups them by game, movie or whatever. Sadly, no Gravity Falls (no game?) or Lord of the Rings.

Click through to the one you’re interested in. There are hundreds of game characters. Click to a character, click the Patreon link, and there on the .ZIP file link.

I got Tintin, Doctor Doom (Marvel), Classic Spiderman (Marvel), Capt. Jack Sparrow, and Godzilla (I think he’s public domain now?) with no problem.

My quick pose and render of Capt. Jack. Responds to G8M expressions.

They’re low-poly game rips, so you probably shouldn’t expect to do pore-probing close-ups on the face. Also, I imagine you should expect texture atlases, so no re-texturing. Some require commercial morph packs to be present. Some of the eyes are a bit glazed and filmy, so may need tweaking.

Once installed they show up in Characters | @Cosplay, not G8. I haven’t tested if they can be mixed with other G8’s via sliders.

Note also the Tutorial on posing with my converted models, re: facial expressions. And the Eyes Offset Tutorial.

Denoising in Photoshop CS6 32-bit in 2023

Posted on by Posted in Companion software, DAZ Studio, Freebies, Tutorials Leave a comment

DAZ’s free Photoshop Bridge only fully works when using 32-bit with a 32-bit Photoshop. Ideally Photoshop CS6. As I’ve explained before here on MyClone, here and here.

But imagine you’ve got it working and are auto-sending renders to a comic-book page that’s set up in Photoshop. Each render drops into a comic-book panel. But, since there’s a lot to render on each page, the renders are quick and grainy and have ‘fireflies’. This grain will not matter so much, if you’re then filtering them using a non-naff artistic Photoshop filter (Mediachance, Sketchmaster 2018, some G’MIC filters).

But what if you’d just like to denoise a photoreal render? Sure you can filter with an NVIDIA-only denoiser, back in DAZ Studio. But that feature has never worked for me, and I guess my NVIDIA graphics card is just not worthy. Or you could lift the shadows and create a flatter and more comic-book look with the Exposure Value and Shutter Speed sliders in DAZ. Less shadows, less noticeable grain and fireflies.

True, there’s a free mcjDenoise plugin for DAZ which actually uses Intel’s OIDN. But it can only be applied to the stack of recent renders. Thus it can’t work to process the render that’s to be automatically sent to Photoshop via the Bridge.

Ideally there would be a Photoshop plugin that uses the open-source Intel OIDN denoiser. Which has a superb AI model especially trained to clear 3D renders. This plugin would speedily fix all the grain and fireflies, in one click. But, rather surprisingly (given the potential market and the very open licence) no-one has made such a thing. There are only two Windows GUI standalones.

What about other AI-powered denoiser plugins for Photoshop? The Topaz AI Denoise plugins were available for CS6, but… only for 64-bit and they were trained for megapixel night photographers, not 3D renders. There were three or four pre-AI denoiser plugins for 32-bit, but they were expensive and (even if still available) are not ideal now.

Thus the fallback in 2023 would be the free and actively developed G’Mic plugin suite. Its 32-bit .8BF is happy to run as a Photoshop CS6 32-bit plugin. Currently in G’Mic, the 2022 filter Testing | Afre | Denoise appears to be the quickest/best on 3D renders. In fact it’s near-instant, which is very nice. But obviously it’s not as good as OIDN. The results are softer than OIDN, and not all noise is cleared. But it’s better than nothing, and if your comic-book page is destined for digital-only… then it may be good enough.

And don’t forget that .PSD is a portable format, so you can do all the render-catching and layout in CS6, and then load the CC 2018 or higher for postwork and filters.

But the ideal for CS6 would be that someone plugs OIDN into G’Mic in the near future.

New store: 3D Shards

Posted on by Posted in DAZ Studio, Freebies, Spotted in the News Leave a comment

Sickleyield has kindly made his formerly-paid ShareCG items free. I’m not sure what was formerly paid there, but going through the items I noted…

SY Big Wave iRay. A big ocean wave with spray. And posing bones.

SY 200 Morphs for Genesis 8 Head & Body.

His conversion of DieTrying’s 182 Morphs for Genesis 2 Male and Genesis 2 Female. Also available for Genesis 1.

His paid G8 items are now over at the new 3D Shards store (slow to load, give it time). A very slick store, with 78 items there at present. Has his new G8 Pinocchio wooden puppet-boy and the older Marshmallow Man / Snowman, among others.

Raffael for Poser

Posted on by Posted in Freebies, Poser Leave a comment

A brief note on Raffael for Poser, for the benefit of future searchers. I didn’t know this existed. Raffael is a flexible ‘base figure’ with several unique character morphs, and his Renderosity store page says he now ships free with Poser 11. He’s quite low-poly, but looks pleasing and ships with a great many sub-morphs.

To load after install, he’s not under !Raffael or Raffael or 3D Dream (the maker), in the Library listing. Actually buried deep, under…

Library | Figures tab || Figures folder | Raffael | 3Dream | Raffael

Also loads in DAZ Studio…

Poser | Figures | 3DDream.

To make the most of this freebie you should install his vital Raffael – Freebies collection 1, which among others includes neanderthals (male and female), a stylised doll, and two unique youth presets (unique for Poser).

Here we see my quick render of the Neanderthal with Creepy Kid hair. Backdrop photo by Toby Speight.

After install, the freebies are then all found under Poses | ! Raffael with a good range of figure types as one-click morphs. There are also MATs and more, all nicely organised. Renders in SuperFly with no problems. Has a paid but rather fabulous male skin pack along with others.

Takes Hiro 3 action poses, I found, more or less. But make sure you first save a T-Pose to get back to. There’s no T-pose in the freebie pack. Elbow crease-bending is definitely not great on some poses, like many older figures. Otherwise anatomically correct, though.

Commercial renders OK on all content.

Raffeal appears to have a completely unique face rig, since none of my existing expression presets will move it at all. There are many face part control dials, but no dials for expressions (happy, sad etc).

What this (now free) figure totally lacks is clothing, other than a basic one-click photo-mapped body suit (to remove this, reload the skin MAT in Poses | ! Raffael). And there’s no CrossDresser licence for Raffael either, so clothing can’t be had that way. Only by wrestling with the Fitting Room. Ugh. Such a pity… what a waste of a nice friendly figure. There is one basic clothing maker’s ‘merchant resource’ for sale on Renderosity, though, for making basic clothing.

Boots for Genesis

Posted on by Posted in DAZ Studio, Freebies Leave a comment

There are a couple of worth-having male freebies on the DAZ Store freebies page, at present. The boots are especially useful generic ‘superhero’ type boots, if you want to get away from ‘fat clomper’ type of boots and toward something more stylish.

After install, the Boots for Genesis are found under: Genesis | Clothing | GnBoots.

Tested with Genesis 3 Male and Genesis 8 Male. Just choose Autofit | None and the boots fit nicely.

Obviously you’re going to ‘kitbash’ (or for 3D, ‘runtime bash’) with this, to make something unique. As I’ve done here. I don’t know of anything that’s specifically designed to work with the boots, and Ravenheart didn’t then make Genesis trousers/pants of a matching length. I can’t find any freebies that were made for the boots, and you only get one MAT with the boots themselves.

The base parts of ‘Sci-fi Guard Outfit’ for G8M seems to kind-of-work with the boots. But as you can see on a G3M there’s poke-through and you’d need to make an opacity MAT. I’ve quickly combined the boots/suit with other random stuff by grabbing some extra pauldrons and gloves from other content packs, and added the Armarni hair. Not great, but could work as a starting base for more character development.

Release: Dust3D 1.0 rc7

Posted on by Posted in 3D Utilities, Companion software, Freebies, Spotted in the News Leave a comment

The open source Dust3D is alive again, after a long hiatus during the Covid years. The 1.0.0 release candidate 7 is now available. Dust3D is a…

“cross-platform 3D modeling software that makes it easy to create low poly 3D models for videogames, 3D printing, and more.”

Relatively easy, free, and under a full MIT open licence. Training Playlist on YouTube.

Release: GMic v3.2.1

Posted on by Posted in 3D Utilities, Companion software, Freebies, Spotted in the News Leave a comment

A new release for GMic, aka G’Mic as GMic v3.2.1. Changelog. Highlights I noted are…

1) A new 3D handling feature, though possibly command-line only?

Command | extract_textures3d

“This will help you extracting textures from 3D objects directly as 2D images, that you can save or process and remap on the object.”

Probably not a replacement for dedicated tools used to get a texture atlas and/or seam templates, but it may be of interest to some.

In Poser Pro, a FBX or Collada export can also get you a single texture map (a ‘texture atlas’), output alongside the FBX output. The problem with a ‘texture atlas’ is that it then prevents drag-and-drop re-texturing of parts. It’s all or nothing. DAZ Studio also has a ‘texture atlas’ output command somewhere or other, with the location depending on which UI layout you use.

2) Better voxelisation of 3D…

“Improved the triangle voxelization algorithm even more. G’MIC is now really a quite nice tool to voxelize 3D meshes!”

Could be useful if you want to have your OBJ export from DAZ/Poser look like a hologram and, once it’s back on Poser or DAZ, put on transparency and glow? But don’t expect to animate afterwards.

3) Basic subdivision of 3D object meshes. Again, you can do this natively in Poser and DAZ.

4) A new filter, to be found in ‘Testing’…

Garagecoder | Upscale [Recursive2x]

Appears to be a sort of ‘intelligent sharpening’ that preserves details better on low-res images? Again, you’d probably do this with AI Gigapixel or online with Base Ten or SWIN, though perhaps this (I’m guessing) is optimised for low-res images?

As always, beware of updating. Because if someone changed the name of their filter, then that breaks your custom preset. For instance, last summer GMic’s long-standing Artistic | Comic Book filter had its functionality updated and the name changed to Comicbook. All my custom presets based on this filter were gone in a flash, and some of the filter’s needed switches and sliders had also been removed. Filter makers really need to be told: “If you’re going to tinker to that extent, then keep the old filter the same and call your new one Comicbook_2″.

British Pronunciation in IPA, for Balabolka TTS

Posted on by Posted in Companion software, Freebies, The Animation Industry Leave a comment

I made a 65,000 word Dictionary of British Pronunciation for the TTS freeware Balabolka, with pre-made IPA pronunciation tags alongside each word. It’s in Balabolka’s .BXT file format, which it can load and which can handle the IPA phoneme symbols.

Possibly useful for those using TTS for making clearly-voiced English tutorials or animations, using the British IVONA 2 voices, and who’re stuck on the pronunciation of a word that they can’t easily substitute. With this you can write freely, knowing that it’s unlikely you’ll have to substitute a dozen or more words with simpler or different forms that don’t quite express what you want to convey.

You can load it in Balabolka and then keep it on a tab in the background, for easy consultation. A good test is getting Ivona 2 Brian to say “mature” in a sentence. It’s very difficult unless you use the IPA coded tag.

For use with the abandonware British voices Ivona 2 Amy, Ivona 2 Ivy, Ivona 2 Emma & Brian. Neospeech Voiceware Bridget is also a very good ‘posh’ British voice, though after install will wrongly show up as ‘United States’ in the list of voice names. Most of the time these do a good job on their own, but sometimes you may need more precision — especially for short comedy animation — and the IPA tags give you that.

DSpeech on test against Balabolka

Posted on by Posted in Companion software, Freebies, The Animation Industry, Tutorials Leave a comment

It seems rather odd to consider old-school text-to-speech software and SAPI5 voices, at a time when Poland’s ElevenLabs is doing such great things with AI-generated voices. But I’m always one to cherish old Windows freeware, and at present all the new AI voices are online and require a monthly/yearly subscription. So I was pleased to find an alternative freeware to Balbolka for desktop PC text-to-speech using SAPI5 voices. Many such voices are also now abandonware on Archive.org, the key companies having since been sold on several times.

Made in Italy, the DSpeech TTS freeware used to be fairly basic, but it’s improved enormously since about 2016. Though this is not a fact reflected in its rather basic 1990s-style download page, which you’ll have to overlook. This freeware is now in version 1.74 (spring 2022), It’s genuine one-man freeware, made in Italy, and is feature-comparable with Balbolka though a bit rougher in UI and Help translation to English.

The DSpeech download link uses only a .GIF button, so if you have a .GIF blocker in your Web browser, then you instead right-click the page and ‘View Source’. You should then see a live working link to the download in the HTML…

The English manual is included in the software. There’s no Windows installer, just unzip where you want and run it.

SCRIPTING: Beyond the usual control tags, DSpeech supports basic scripting including voice-recognition and script loops. Which is unusual. Apparently it can even read out VLCplayer movie sub-titles in real-time, in a chosen SAPI5 TTS voice and speed.

TAGS: The tagging menus make switching voices easy. There’s better right-click support than in the latest Balabolka for adding tags, though that’s not saying much. When you highlight a word in DSpeech, and add a tag, the word is not wrapped with a closing and opening tag, it’s deleted. Urgh! Having right-click is great, but… the rest of the tag insertion system is not good.

LOQUENDO: DSpeech is supposed to support Loquendo ‘voice expressions’ (laugh, sigh etc) via the Italian Loquendo 6 Italian ‘Paola’ and ‘Luca’ TTS voices, combining words with special expressive tags such as \_Laugh and suchlike. Later the tag syntax was changed to \item=Laugh in Loquendo version 7 voices. But while these v6 voices work fine in any DSpeech, and v7 voices work fine in DSpeech v.1.72.29 (December 2018, not the latest 1.74.x), their expressive cues no longer vocalise in DSpeech. You just hear silence.

Spanish Loquendo 7 voices (not 6) can however ‘express’ when used in Loquendo’s own Java-based TTS Director, which came with the Loquendo SDK. See YouTube for examples and useful links.

Regrettably neither the Loquendo 6 or 7 voices can even be played in the other TTS freeware Balabolka, though they do show up on its voice menu. It thus seems that properly-working Loquendo voices are limited to…

* Loquendo 6 (any voice) on DSpeech 1.74.x or earlier. Loquendo 7 not supported on the latest DSpeech.

* Loquendo 7 (Spanish) on DSpeech 1.72.29 (or earlier?), or Loquendo 7 (Spanish) on Loquendo TTS Director with SDK and Spanish pack.

The Spanish version 7 voices do however have ‘expressives’ that work fine with Loquendo TTS Director 7, which was Windows freeware which shipped with the developer/API/SDK kit. This success at least showed me that the problem was not with my PC or a 32-bit / 64-bit Windows clash, at least for version 7 voices.

Yet it’s strange. Obviously DSpeech could, at one time, play the ‘expressives’ in the Loquendo 6 voices. But, no longer, it seems. Switching back to an older DSpeech 1.72.29 didn’t cure the problem, but it did usefully fix the playing of the Loquendo 7 voices. I suspect that Loquendo 6 voices now have a 32-bit / 64-bit problem on 64-bit Windows, despite the player and voices both being 32-bit.

Loquendo TTS Director voices have a complete list of expressives in the C:\Program Files (x86)\Loquendo\LTTS7\data\voices\Soledad\SoledadGildedParalinguistics.sde file (change name for each voice). Open it in Notepad++ to see the list in plain-text. For instance, Soledad has the following, and obviously you can also mix and match and tone-shift…


\item=Ah
\item=Ah_01
\item=Ah_02
\item=Ay
\item=Ay_01
\item=Breath
\item=Breath_01
\item=Buh
\item=Buh_01
\item=Buuu
\item=Buuu_01
\item=Cataplum
\item=Cataplum_01
\item=Click
\item=Click_01
\item=Click_02
\item=Cough
\item=Cough_01
\item=Cough_02
\item=Cry
\item=Cry_01
\item=Cry_02
\item=Cry_03
\item=Ehm
\item=Ehm_01
\item=Epa
\item=Epa_01
\item=Hey
\item=Hey_01
\item=Hiccup
\item=Hiccup_01
\item=Hiccup_02
\item=Laugh
\item=Laugh_01
\item=Laugh_02
\item=Mhmm
\item=Mhmm_01
\item=Mhmm_02
\item=Mhmm_03
\item=Oh
\item=Oh_01
\item=Ohoh
\item=Ohoh_01
\item=Ops
\item=Ops_01
\item=Prrr
\item=Prrr_01
\item=Shhh
\item=Shhh_01
\item=Sigh
\item=Sigh_01
\item=Sigh_02
\item=Singing
\item=Singing_01
\item=Smack
\item=Smack_01
\item=Smack_02
\item=Sniff
\item=Sniff_01
\item=Sniff_02
\item=Sniff_03
\item=Snore
\item=Snore_01
\item=Swallow
\item=Swallow_01
\item=Throat
\item=Throat_01
\item=Throat_02
\item=Throat_03
\item=Uff
\item=Uff_01
\item=Ups
\item=Ups_01
\item=Whistle
\item=Whistle_01
\item=Whistle_02
\item=Whistle_03
\item=Whistle_04
\item=Whistle_05
\item=Yawn
\item=Yawn_01
\item=Yawn_02
\item=Yeee
\item=Yeee_01
\item=Yuhu
\item=Yuhu_01
\item=Yuhu_02
\item=Zas
\item=Zas_01

Easier to just paste these all in and cut out what you don’t want. Rather than wrestling with menu-based insertion.

VOICEWARE: DSpeech has support for reading with a VoiceWare TTS, but not for a vital aspect of the voice. The first version of the TTS VoiceWare voices (e.g. VW Bridget, British) had different inflections on words if you added ! ?! or !? (again, see YouTube for demo and useful links). But this feature of the voice is not supported in DSpeech. It is supported in Balabolka. So this is another deal-breaker for DSpeech.

CONCLUSIONS: Despite what at first glance seems to be DSpeech’s more intuitive right-click tag adding, Balabolka is on several counts the superior tool for longer-form editing. It properly wraps highlighted words in starting/closing tags, which is vital if you’re TTS-coding something longer than a paragraph. It also supports VoiceWare’s ! ?! and !?, useful for one of the best British voices.

I thus suggest using the latest Balabolka for freeware TTS scripting and recording, and the old Loquendo TTS Director + its Spanish voices for creation of vocal FX, pitch and speed-shifted to match the voice being used in Balabolka. Then embed these vocal FX as audio clips in Balabolka. This is not as ideal as having Balabolka support Loquendo (it refuses to even read their voices), but it’s a viable workaround.

The ideal would be to have a standard SAPI5 voice that was ‘expressives only’, for use in Balabolka. A sort of audio FX bank, that could be reliably called with a simple tag (such as \_sneeze etc). But so far as I can see, that doesn’t exist, other than by chopping bits from my Dictionary of British Pronunciation for TTS.

Finally, note that TTS Director only ‘sees’ its own Loquendo voices, and is therefore no good as a general SAPI5 TTS script editor. TTS can be done in Adode Captivate (used for super-Powerpoint ‘e-learning’ creation) and in CrazyTalk / Cartoon Animator, but the editing is not at all comparable to Balaboka.

Two excellent TTS voices, now free

Posted on by Posted in Companion software, Freebies Leave a comment

Excellent clear British SAPI5 TTS voices for short animations and tutorials are Ivona Voice 1.6 Amy 22kHz (aka Ivona 2 Amy). The other is the less common Neospeech Voiceware Bridget (demo). Yes, they’re still robo voices, but I’d say they’re the most pleasing and human of the female British voices released in the 2010s for SAPI5. And you can’t argue with free and offline. No subscriptions or data-gouging needed (though Eleven Labs are the best, if you want that). Both voices are now free on Archive.org, and work with the free Balabolka. Here’s how to control them with some simple markup.

1. Amy can be controlled using the normal SAPI markup (SSML) in the Balabolka editor. She also supports phenomes (visimes) symbols, a prosidy markup tag, and others.

2. Neospeech Voiceware Bridget however does not support phenomes, prosidy etc and requires the following XML tags to add pauses and emphasis…

Add ! or ?! to inflect and emote a word at the end of a sentence…

Also working as XML tags with Bridget…

No closing tag is needed for the following milliseconds pause tag…

Incidentally, Neospeech Voiceware Bridget shows up in Balbolka as “VW Bridget English (United States)”, when she should be “VW Bridget English (British, upper class)”.

Microsoft Sam on Windows 64-bit

Posted on by Posted in Freebies 1 Comment

Old-school ‘robot voice’ Microsoft Sam on 64-bit Windows. Tested and working with the text to speech freeware Balabolka. Archive.org only has the 32-bit installers, which is no good for 64-bit Windows. This one has been extracted from the original voice resources and a new installer created (WinXP_TTS_Voices_v1.3.exe). Still useful for robot/computer voices in a 3D animation. I read that meme creators (presumably animated?) also find a use for it.

Also installs Microsoft Mike, again good for an old-school robot voice.